Charging System
Alternator Replacement
1. Make sure you have the anti-theft code for the radio,
then write down the frequencies for the radio's
preset buftons.
2. Disconnect the negalive cable front the battery,
then disconnect the positive cable.
3. Move the auto-tensioner (A) to relieve tension from
the alternator belt (Bl, and remove the alternator-
compressor belt.
Disconnect the 4P connector (A) from the alternator
( B ) , a n d d i s c o n n e c t B L K w i r e f r o m t h e a l t e r n a t o r B
t e r m i n a l ( C ) .
4 .
I x 1.25 mm
1 2 N m
(1.2 kgf.m,
I tbf.ft)
4-26
5. Remove the mounting bolts, then remove the
alternator.
10 x 1.25 mm
1 0 x 1 . 2 5 m m
44 N m {4.5 kgf m,33lbf.ft}
Install the alternator and alternator-compressor
belt in the reverse order of removal
Connect the positive cable and negative cable to
the battery.
Enter the anti-theft code for the radio, then enter
the customer's radio station presets.
Set the clock.
Perform the engine control module (ECl\il) idle learn
p r o c e d u r e ( s e e p a g e 1 1 - 1 0 0 ) .
8 .
9 .
7 .
1 0 .
44 N.m 14.5 kgf.m,33lbf.ft)