Setting Date And Time; Configuring Advanced Regional Audio And Video Settings - Avaya Scopia XT Telepresence Deployment Manual

Hide thumbs Also See for Scopia XT Telepresence:
Table of Contents

Advertisement

Configuring the XT Telepresence

Setting Date and Time

About this task
You can set the date and time from either the endpoint or the web interface.
You must set the same date and time for all three XT Codec Units in your XT Telepresence
deployment.
Procedure
1. Access the date and time settings. From the endpoint's main menu, select Configure >
Advanced > System > Date & Time > General. From the XT Series web interface, select
Administrator Settings > System > Date & Time.
2. Set the date and time, as described in
page 60.
If you set Internet time to Yes, you cannot modify the date and time fields.
Table 9: Configuring date and time settings
Field Name
Day, Month, Year,
Hour, Minutes
Internet time
Use Default NTP
Server, Server 1,
Server 2
Refresh time (min)
3. From the web interface only, select Save.
Related links
Configuring Basic Settings with the Quick Setup Wizard

Configuring Advanced Regional Audio and Video Settings

About this task
After you set the country and language of the device in the Quick Setup Wizard, the system defaults
to the audio and video standards of that country. This section details how to change those settings if
required.
You must configure the same values for all three XT Codec Units in your XT Telepresence
deployment.
January 2017
Table 9: Configuring date and time settings
Description
Enter the date and time.
Select Yes to synchronize the system clock with the network clock, thus
allowing you to align devices connected to the Internet using Network
Time Protocol (NTP).
If your organization uses an external Network Time Protocol (NTP) server
for synchronizing the system clock, select Yes. If your organization uses
one or two internal NTP servers for that purpose, select No and enter the
server IP address in fields Server 1 and/or Server 2.
Enter the time period after which the system contacts the NTP server to
refresh the clock. (10...1000 minutes)
®
Avaya Scopia
XT Telepresence Deployment Guide
Comments on this document? infodev@avaya.com
on page 51
on
60

Advertisement

Table of Contents
loading

Table of Contents