®
PARTNER
Advanced Communications System Installation, Programming, and Use
Setting the Date, Day, and Time
After supplying power to the control unit, use the following procedures to set the system clock:
System Date (#101) to set the month, day, and year
System Day (#102) to set the day of the week (for Release 2.0 and earlier systems)
System Time (#103) to set the hour and minutes
Automatic Daylight/Standard Times (#126) to automatically update the system clock
Turn this feature off if you live in an area without daylight savings time.
Considerations
Backup Programming—Automatic (#123) uses the System Date and System Time to
schedule the automatic backups.
Backup Programming—Automatic (#123) and Backup Programming—Manual (#124) do
not back up the System Date, the System Day, or the System Time.
Restore Programming (#125) does not restore the System Date, System Day, or System
Time.
Be sure that the System Date, System Day, and System Time are set correctly before using
backup procedures.
System Date (#101)
Use this feature to set the month, day, and year. The system displays only the month and day on
display telephones when the telephone is idle; the month, day, and year print on SMDR call
reports.
Considerations
The System Date date-stamps the backup files when you use Backup Programming.
Setting the Date, Day, and Time
3-10
3
3
3
3