Show Ipv6 Traffic; Show Ipv6 Summary Output Details - Enterasys C3G124-24 Configuration Manual

show ipv6 traffic

Defaults
None.
Mode
Router privileged execution: C3(su)->router#
Router user execution: C3(su)->router>
Usage
Use the command without parameters to display the count summary for only the best routes. Use
all to display the count summary for all routes, including best and non-best routes.
Example
This example illustrates the summary information displayed by this command.
C3(su)->router>show ipv6 route summary all
IPv6 Routing Table Summary - 6 entries
Connected Routes
Static Routes
OSPF Routes
Intra Area Routes
Inter Area Routes
External Type-1 Routes
External Type-2 Routes
Total routes
Number of Prefixes:
/0: 1,
Table 29-4
Table 29-4 show ipv6 summary Output Details
Output Field
Connected Routes
Static Routes
OSPF Routes
Number of Prefixes
Total Routes
show ipv6 traffic
Use this command to show traffic and statistics for IPv6 and ICMPv6.
Syntax
show ipv6 traffic [interface]
29-28 IPv6 Configuration
/64: 5
provides an explanation of the command output.
3
3
0
0
0
0
0
6
What It Displays...
Total number of connected routes in the routing table.
Total number of static routes in the routing table.
Total number of routes installed by OSPFv3 protocol.
Summarizes the number of routes with prefixes of different lengths
Total number of routes in the routing table.