Clear Spantree Lpwindow; Set Spantree Lptrapenable - Enterasys C3G124-24 Configuration Manual

Stackable switches

Hide thumbs Also See for C3G124-24:

Table of Contents

Switch command, read-only.

This example shows how to display the current Loop Protect window value:

C3(rw)->show spantree lpwindow

The Loop Protect event window is set to 120 seconds

clear spantree lpwindow

Use this command to reset the Loop Protect event window to the default value of 180 seconds.

clear spantree lpwindow

Switch command, read-write.

This example shows how to reset the Loop Protect event window to the default of 180 seconds:

C3(rw)->clear spantree lpwindow

Use this command to enable or disable Loop Protect event notification.

set spantree lptrapenable {enable | disable}

enable | disable

Enables or disables the sending of Loop Protect traps. Default is

clear spantree lpwindow

Enterasys C3 Configuration Guide 13-53

Show Quick Links

Table of Contents

Enterasys c3