Enterasys C3G124-24 Configuration Manual page 826

show dot1x
If port-string is not specified, information for all ports will be displayed.
Mode
Switch command, read-only.
Examples
This example shows how to display 802.1X status:
C3(su)->show dot1x
DOT1X is disabled.
This example shows how to display authentication diagnostics information for ge.1.1:
C3(su)->show dot1x auth-diag
Port : 1
Enter Connecting:
EAP Logoffs While Connecting:
Enter Authenticating:
Success While Authenticating
Timeouts While Authenticating:
Fails While Authenticating:
ReAuths While Authenticating:
EAP Starts While Authenticating:
EAP logoff While Authenticating:
Backend Responses:
Backend Access Challenges:
Backend Others Requests To Supp:
Backend NonNak Responses From:
Backend Auth Successes:
Backend Auth Fails:
This example shows how to display authentication statistics for ge.1.1:
C3(su)->show dot1x auth-stats ge.1.1
Port: 1
EAPOL Frames Rx:
EAPOL Frames Tx:
EAPOL Start Frames Rx:
EAPOL Logoff Frames Rx:
EAPOL RespId Frames Rx:
EAPOL Resp Frames Rx:
EAPOL Req Frames Tx:
EAP Length Error Frames Rx:
Last EAPOL Frame Version:
Last EAPOL Frame Source:
This example shows how to display the status of port reauthentication control for ge.1.1 through
ge.1.6:
C3(su)->show dot1x port reauth ge.1.1-6
Port 1: Port reauthenticate:
Port 2: Port reauthenticate:
Port 3: Port reauthenticate:
Port 4: Port reauthenticate:
Port 5: Port reauthenticate:
Port 6: Port reauthenticate:
32-20 Authentication and Authorization Configuration
ge
Auth-Diag
Auth-Stats
.1.1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
00:00:00:00:00:00
FALSE
FALSE
FALSE
FALSE
FALSE
FALSE