Parameters
port-string
Defaults
If port-string is not specified, aliases for all ports will be displayed.
Mode
Switch command, read-only.
Example
This example shows how to display alias information for ports 1-3 on unit 3:
C3(rw)->show port alias ge.3.1-3
Port
Port
Port
set port alias
Use this command to assign an alias name to a port.
Syntax
set port alias port-string [name]
Parameters
port-string
name
Defaults
If name is not specified, the alias assigned to the port will be cleared.
Mode
Switch command, read-write.
Examples
This example shows how to assign the alias "Admin" to
C3(rw)->set port alias ge.3.3 Admin
This example shows how to clear the alias for
C3(rw)->set port alias ge.3.3
(Optional) Displays alias name(s) for specific port(s). For a detailed
description of possible port-string values, refer to
Used in the
ge.3.1 user
ge.3.2 user
ge.3.3 Admin
Specifies the port to which an alias will be assigned. For a detailed
description of possible port-string values, refer to
Used in the
(Optional) Assigns an alias name to the port. If the alias name contains
spaces, the text string must be surrounded by double quotes. Maximum
length is 60 characters.
CLI" on page 11-1.
CLI" on page 11-1.
ge.
3.3:
ge.
"Port String Syntax
"Port String Syntax
3.3:
Enterasys C3 Configuration Guide 11-9
set port alias