Show Snmp Access Output Details - Enterasys C3G124-24 Configuration Manual

show snmp access
If security-model is not specified, access information for all SNMP versions will be displayed.
If noauthentication, authentication or privacy are not specified, access information for all
security levels will be displayed.
If context is not specified, all contexts will be displayed.
If volatile, nonvolatile or read-only are not specified, all entries of all storage types will be
displayed.
Mode
Switch command, read-only.
Example
This example shows how to display SNMP access information:
C3(su)->show snmp access
Group
Security model
Security level
Read View
Write View
Notify View
Context match
Storage type
Row status
Group
Security model
Security level
Read View
Write View
Notify View
Context match
Storage type
Row status
Table 12-5
Table 12-5 show snmp access Output Details
Output Field
Group
Security model
Security level
Read View
Write View
Notify View
Context match
12-16 SNMP Configuration
= SystemAdmin
= USM
= noAuthNoPriv
= All
=
= All
= exact match
= nonVolatile
= active
= NightOperator
= USM
= noAuthNoPriv
= All
=
= All
= exact match
= nonVolatile
= active
provides an explanation of the command output.
What It Displays...
SNMP group name.
Security model applied to this group. Valid types are: SNMPv1,
SNMPv2c, and SNMPv3 (User based - USM).
Security level applied to this group. Valid levels are:
• noAuthNoPrivacy (no authentication required)
• AuthNoPrivacy (authentication required)
• authPriv (privacy -- most secure level)
Name of the view that allows this group to view SNMP MIB objects.
Name of the view that allows this group to configure the contents of the
SNMP agent
Name of the view that allows this group to send an SNMP trap message.
Whether or not SNMP context match must be exact (full context name
match) or a partial match with a given prefix.
.