clear dhcp pool netbios-node-type
clear dhcp pool netbios-node-type
Use this command to remove the NetBIOS node type from the address pool being configured.
Syntax
clear dhcp pool poolname netbios-node-type
Parameters
poolname
Defaults
None.
Mode
Switch command, read-write.
Example
This example removes the NetBIOS node type from the address pool "auto1."
C3(rw)->clear dhcp pool auto1 netbios-node-type
set dhcp pool option
Use this command to configure DHCP options, described in RFC 2132.
Syntax
set dhcp pool poolname option code {ascii string | hex string-list | ip address-
list}
Parameters
poolname
code
ascii string
hex string-list
ip address-list
Defaults
None.
Mode
Switch command, read-write.
22-28 DHCP Server Configuration
Specifies the name of the address pool. Pool names may be up to 31
characters in length.
Specifies the name of the address pool. Pool names may be up to 31
characters in length.
Specifies the DHCP option code, as defined in RFC 2132. Value can range
from 1 to 254.
Specifies the data in ASCII format. An ASCII character string containing a
space must be enclosed in quotations.
Specifies the data in HEX format. Up to 8 HEX strings can be entered.
Specifies the data in IP address format. Up to 8 IP addresses can be entered.