Set Pwa Enhancedmode - Enterasys C3G124-24 Configuration Manual

set pwa enhancedmode

set pwa enhancedmode
This command enables PWA URL redirection. The switch intercepts all HTTP packets on port 80
from the end user, and sends the end user a refresh page destined for the PWA IP Address
configured.
Syntax
set pwa enhancedmode {enable | disable}
Parameters
enable | disable
Defaults
None.
Mode
Switch command, read-write.
Example
This example shows how to enable PWA enhancedmode:
C3(su)->set pwa enhancedmode enable
32-88 Authentication and Authorization Configuration
Enables or disables PWA enhancedmode.