Show Cdp Traffic; Table 4-27. Show Cdp Traffic Output - Enterasys Matrix-V V2H124-24 Configuration Manual

4
Command Line Interface
Table 4-26. Show CDP Neighbors Output - Neighbor Types (Continued)
Field Number
Type
dnsServer 6
dhcpServer 7
dnsDhcpServer 8

show cdp traffic

Use this command to display CDP traffic statistics.
Syntax
show cdp traffic
Command Mode
Privileged Executive
Example
This example shows how to display CDP traffic information. (See Table 3-22 on
page 4-78.)
Console#sh cdp traffic
Total packets output: 543, Input: 333
Invalid version:
Transmit error:
Parse error:
Memory error:
Console#
Field Description
Total packets - Total number of CDP packets received/sent by the device over all ports.
output / input
Invalid version Count of CDP packets received by the device with an invalid version.
Transmit error Count of errors made by the device while trying to send CDP packets.
Parse error Count of CDP packets received by the device that could not be parsed.
Memory error Count of memory errors that occurred in the device while either trying to process a CDP
packet, or adding to the neighbor entry, or while trying to send a CDP packet.
4-78
Description
The connected device runs a Domain Name System server.
The connected device runs Dynamic Host Configuration Protocol server.
The connected device runs a DNS server and a DHCP server.
0
0
0
0

Table 4-27. Show CDP Traffic Output