Show Snmp Targetparams Output Details - Enterasys C3G124-24 Configuration Manual

Defaults
If targetParams is not specified, entries associated with all target parameters will be displayed.
If not specified, entries of all storage types will be displayed.
Mode
Switch command, read-only.
Example
This example shows how to display SNMP target parameters information:
C3(su)->show snmp targetparams
--- SNMP TargetParams information ---
Target Parameter Name
Security Name
Message Proc. Model
Security Level
Storage type
Row status
Target Parameter Name
Security Name
Message Proc. Model
Security Level
Storage type
Row status
Target Parameter Name
Security Name
Message Proc. Model
Security Level
Storage type
Row status
Table 12-7 provides an explanation of the command output.
Table 12-7 show snmp targetparams Output Details
Output Field
Target Parameter Name
Security Name
Message Proc. Model
Security Level
Storage type
Row status
= v1ExampleParams
= public
= SNMPv1
= noAuthNoPriv
= nonVolatile
= active
= v2cExampleParams
= public
= SNMPv2c
= noAuthNoPriv
= nonVolatile
= active
= v3ExampleParams
= CharlieDChief
= USM
= authNoPriv
= nonVolatile
= active
What It Displays...
Unique identifier for the parameter in the SNMP target parameters table.
Maximum length is 32 bytes.
Security string definition.
SNMP version.
Type of security level (auth: security level is set to use authentication
protocol, noauth: security level is not set to use authentication protocol,
or privacy).
Whether entry is stored in volatile, nonvolatile or read-only memory.
Status of this entry: active, notInService, or notReady.
show snmp targetparams
Enterasys C3 Configuration Guide 12-23