Enterasys C3G124-24 Configuration Manual page 140

show system password
Table 5-2 show system password Output Details (Continued)
Output...
Password warning period
Password grace period
Password grace limit
Password assignment required at
account creation
Allow multiple accounts to share same
password
Length of substrings in previous
password(s) not allowed in new
password
Allow the same character to appear
consecutively in a password
Require non-superusers to change
password at first login
5-12 Setting User Accounts and Passwords
What it displays...
Period of time prior to password expiration when user will be
notified. The range is from 1 to 30 days with a default of 20 days.
Configured with the set system password warning-period
command.
The number of days after password expiration during which the
password will still be honored. The range is from 0 to 30 days, with
a default of 0.
Configured with the set system password grace-period
command.
The maximum number of logins that will still be honored after a
password has expired. The range is from 0 to 3, with a default of 3.
Configured with the set system password grace-limit command.
Specifies whether a password is required at the time of user
account creation:
yes — Password is required when creating a user account.
no — Password is not required when creating a user account.
Configured with the set system password require-at-creation
command.
Specifies whether multiple accounts can share the same
password:
yes - Specifies that multiple accounts may share the same
password. Default value.
no - Specifies that multiple accounts may not share the same
password.
Configured with the set system password allow-duplicates
command.
Specifies the length of any substring present in a previous
password(s) for this account that may not be used in a new
password. Valid values are 0 to 40, default is 0.
Configured with the set system password substring-match-len
command.
Specifies whether the same character may appear consecutively
in the same password:
yes - specifies that the same character may appear
consecutively. Default value.
num - specifies the number of characters that may be repeated
consecutively. Valid values are 0 to 39.
Configured with the set system password allow-repeating-
chars command.
Specifies whether new users are required to change their
password upon first login:
yes — specifies that new users must change the password for
this account upon first login.
no — specifies that new users are not required to change the
password for this account upon first login.
Configured with the set system password change-first-login
command.