clear mgmt-auth-notify
Defaults
None.
Mode
Switch command, read-write.
Usage
Ensure that SNMP is correctly configured on the module in order to send these notifications.
Example
This example displays the state of Management Authentication Notification access types prior to
using the clear command, then displays the same information after using the clear command:
C3(su)->show mgmt-auth-notify
Management Type
---------------
console
ssh
telnet
webview
inactiveUser
maxUserAttempt
maxUserFail
C3(su)->clear mgmt-auth-notify
C3(su)->show mgmt-auth-notify
Management Type
---------------
console
ssh
telnet
webview
inactiveUser
maxUserAttempt
maxUserFail
6-4 Management Authentication Notification MIB Commands
Status
--------
Enabled
Disabled
Enabled
Disabled
Disabled
Disabled
Disabled
Status
--------
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled