Show Ipv6 Neighbors; Show Ipv6 Netstat - Enterasys C3G124-24 Configuration Manual

show ipv6 neighbors

Use this command to display the system IPv6 Neighbor Discovery Protocol cache.
Syntax
show ipv6 neighbors
Parameters
None.
Defaults
None.
Mode
Switch command, read-only.
Example
This example shows example output of this command.
C3(su)->show ipv6 neighbors
IPv6 Address
--------------------------------------- ----------------- ----- -------
2001:db8:1234:6666::2310:3

show ipv6 netstat

Use this command to display IPv6 netstat information.
Syntax
show ipv6 netstat
Parameters
None.
Defaults
None.
Mode
Switch command, read-only.
Usage
The network connection information displayed by this command can be used to find problems in
the network.
Example
This example shows the output of this command.
command.
MAC Address
00:04:76:73:42:31 True
Table 28-1 describes the output of this
Enterasys C3 Configuration Guide 28-7
show ipv6 neighbors
Last
isRtr State Updated
-------
Reachable 00:01:16