Set Vlan Forbidden - Enterasys C3G124-24 Configuration Manual

set vlan forbidden

Mode
Switch command, read-write.
Example
This example shows you how to show VLAN egress information for
all three ports are allowed to transmit VLAN 1 frames as tagged and VLAN 10 frames as
untagged. Both are static VLANs:
C3(su)->show port egress ge.1.1-3
Port
Number
-------------------------------------------------------
ge.1.1
ge.1.1
ge.1.2
ge.1.2
ge.1.3
ge.1.3
set vlan forbidden
Use this command to prevent one or more ports from participating in a VLAN. This setting
instructs the device to ignore dynamic requests (either through GVRP or dynamic egress) for the
port to join the VLAN.
Syntax
set vlan forbidden vlan-id port-string
Parameters
vlan-id
port-string
Defaults
None.
Mode
Switch command, read-write.
Example
This example shows you how to set
C3(su)->set vlan forbidden 6 ge.1.3
14-14 802.1Q VLAN Configuration
Vlan Egress
Id Status
1 tagged
10 untagged
1 tagged
10 untagged
1 tagged
10 untagged
Specifies the VLAN for which to set forbidden port(s).
Specifies the port(s) to set as forbidden for the specified vlan-id.
ge.
Registration
Status
static
static
static
static
static
static
1.3 to forbidden for VLAN 6:
1.1 through 3. In this case,
ge.