Parameters
port port-string
mac mac-addr
Defaults
If no parameters are entered, all bindings (static and dynamic) are removed.
Mode
Switch command, read-write.
Example
This example clears the static binding entry that includes port ge.1.2.
C3(su)->clear dhcpsnooping binding port ge.1.2
clear dhcpsnooping statistics
Use this command to clear the DHCP snooping statistics counters.
Syntax
clear dhcpsnooping statistics
Parameters
None.
Defaults
None.
Mode
Switch command, read-write.
Example
This example clears the DHCP snooping statistics counters for all enabled untrusted ports.
C3
(su)->clear dhcpsnooping statistics
clear dhcpsnooping limit
Use this command to reset the rate limit values to the defaults of 15 packets per second with a
burst interval of 1 second.
Syntax
clear dhcpsnooping limit port-string
Parameters
port-string
(Optional) Specifies the entry or entries to remove by port identifier.
(Optional) Specifies the entry to remove by MAC address.
Specifies the port or ports to which this command applies.
clear dhcpsnooping statistics
Enterasys C3 Configuration Guide 23-13