Set Dot1X - Enterasys C3G124-24 Configuration Manual

set dot1x

Port : 1
PAE state:
Backend auth state:
Admin controlled directions:
Oper controlled directions:
Auth controlled port status:
Auth controlled port control:
Quiet period:
Transmission period:
Supplicant timeout:
Server timeout:
Maximum requests:
Reauthentication period:
Reauthentication control:
set dot1x
Use this command to enable or disable 802.1X authentication, to reauthenticate one or more access
entities, or to reinitialize one or more supplicants.
Syntax
set dot1x {enable | disable | port {init | reauth} {true | false} [port-string]}
Parameters
enable | disable
port
init | reauth
true | false
port-string
Defaults
If no ports are specified, the reinitialization or reauthentication setting will be applied to all ports.
Mode
Switch command, read-write.
Usage
Disabling 802.1X authentication globally, by not entering a specific port-string value, will enable
the EAP pass-through feature. EAP pass-through allows client authentication packets to be
forwarded unmodified through the switch to an upstream device.
Examples
This example shows how to enable 802.1X:
C3(su)->set dot1x enable
This example shows how to reinitialize
C3(rw)->set dot1x port init true ge.1.2
32-22 Authentication and Authorization Configuration
Auth-Config
60
30
30
30
2
3600
Disabled
Enables or disables 802.1X.
Enable or disable 802.1X reauthentication or initialization control on one or
more ports.
Configure initialization or reauthentication control.
Enable (true) or disable (false) reinitialization/reauthentication.
(Optional) Specifies the port(s) to reinitialize or reauthenticate.
Initialize
Initialize
Both
Both
Authorized
Auto
.1.2:
ge