Show Ports Storm-Control; Clear Host; Permit (Management); Show Copper-Ports Tdr - Dell PowerConnect 5324 Release Note

show ports storm-control

Update the command as follows:
Field Current Guide
Example Broadcast Storm control [kbytes/sec]

clear host

Update the command as follows:
Field Current Guide
Example The following example deletes entries
from the host name-to-address cache.

permit (management)

Update the command as follows:
Field Current Guide
User The system supports up to 256
Guidelines management access rules.

show copper-ports tdr

Update the command as follows:
Field Current Guide
Example The following example displays the last
TDR (Time Domain Reflectometry) tests
on all ports.
g5

Port monitor

Update the command as follows:
Field Current Guide
User
Guidelines
System Firmware Version 2.0.0.39
PowerConnect 5324 Release Notes
Fiber - -
Change to:
Broadcast Storm control [packets/sec]
Change to:
The following example deletes all entries from
the host name-to-address cache.
Change to:
The system supports up to 128 management
access rules.
Change to:
The following example displays the last TDR
(Time Domain Reflectometry) tests on all copper
ports.
Delete.
Change to:
Add this extra bullet:
♦
Maximum number of supported source ports
is 8 (Rx and Tx).
Subject to Change Without Notice Page 16