Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
11.1.17 users login
This command assigns the specified authentication login list to the specified user for
system login. The
configured login list.
If the user is assigned a login list that requires remote authentication, all access to the
interface from all CLI, web, and telnet sessions will be blocked until the authentication is
complete.
Note that the login list associated with the 'admin' user can not be changed to prevent
accidental lockout from the switch.
Format
Mode
11.1.18 show authentication
This command displays the ordered authentication methods for all authentication login
lists.
Format
Mode
Authentication
Login List
Method 1
Method 2
Method 3
11.1.19 show authentication users
This command displays information about the users assigned to the specified
authentication login list. If the login is assigned to non-configured users, the user "default"
will appear in the user column.
Format
Mode
Port-Based Access and Authentication Commands
must be a configured
<user>
users login <user> <listname>
Global Config
show authentication
Privileged EXEC
This displays the authentication login listname.
This displays the first method in the specified authentication
login list, if any.
This displays the second method in the specified authentica-
tion login list, if any.
This displays the third method in the specified authentication
login list, if any.
show authentication users <listname>
Privileged EXEC
v3.0, January 2008
and the
<user>
<listname>
must be a
11-9