Configure The Management Security Settings; Change The Password For The Local Browser Interface - NETGEAR S350 Series User Manual

S350 Series 24-Port (PoE+) and 48-Port Gigabit Ethernet Smart Managed Pro Switches
Configure the Management Security
Settings
You can configure the login password, Remote Authorization Dial-In User Service (RADIUS)
settings, Terminal Access Controller Access Control System (TACACS) settings, and
authentication lists.

Change the Password for the Local Browser Interface

You can change the login password for the default user with the user name admin.
To change the login password for the local browser interface:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Discover or Change the Switch IP
Address on page 12.
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Security> Management Security > User Configuration > Change Password.
The Change Password page displays.
6. In the Current Password field, enter the current password.
The default password is password. The password is displayed in dots.
7. In the New Password field, specify the new password.
The password is displayed in dots. A password can be up to 20 alphanumeric characters
in length, and is case-sensitive.
8. In the Confirm Password field, enter the password again to confirm that you entered it
correctly.
The password is displayed in dots.
9. Click the Apply button.
Your settings are saved.
Manage Device Security 210 User Manual