Show Interface Ethernet - NETGEAR FSM7328PS - ProSafe 24 Port 10/100 L3 Managed Stackable Switch Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
Packets
Transmitted
Without Error
Broadcast
Packets
Transmitted
Transmit Packet
Errors
Address Entries
Currently In Use
VLAN Entries
Currently In Use
Time Since
Counters Last
Cleared

18.1.5 show interface ethernet

This command displays detailed statistics for a specific interface or for all CPU traffic
based upon the argument.
Format
Mode
The display parameters, when the argument is
Packets
Received
System Maintenance Commands
Total number of packets transmitted out the interface.
The total number of packets that higher-level protocols
requested to be transmitted to the Broadcast address, includ-
ing those that were discarded or not sent.
The number of outbound packets that could not be transmit-
ted because of errors.
The total number of Forwarding Database Address Table
entries now active on the switch, including learned and static
entries.
The number of VLAN entries presently occupying the VLAN
table.
The elapsed time, in days, hours, minutes, and seconds since
the statistics for this switch were last cleared.
show interface ethernet {<unit/slot/port> | switch-
port}
Privileged EXEC
<unit/slot/port>
Octets Received - The total number of octets of data (includ-
ing those in bad packets) received on the network (excluding
framing bits but including Frame Check Sequence (FCS)
octets). This object can be used as a reasonable estimate of
Ethernet utilization. If greater precision is desired, the ether-
v3.0, January 2008
, are as follows:
18-5