Displaying/Not Displaying Comparative Set Values - Omron K3HB-C User Manual

Section 5 Functions and Operations
5.25 Displaying/Not Displaying Comparative Set
Values
2
sv. dsp
L
(SV.DSP)
0
L
Displays "L 0."
sv. dsp
2
L
off
Displays "L 2."
sv. dsp
2
L
off
sv. dsp
2
L
on
d. ref
2
L
off
123. 4
123. 4
5-68
Comparative set values can be displayed or not displayed on the SV
display during operation.
This is set using the following parameter.
Parameter
Comparative set value
display
sv.dsp
If "comparative set value display" is set to OFF, the comparative set
value display will turn OFF (not be lit) after 10 s in RUN level. The
comparative set value is displayed again when any key is pressed.
Parameter Setting Procedure
A Press the L [LEVEL] Key for at least 3 s in RUN level to move to
L
the initial setting level.
3 s min.
0" is displayed on the level/bank display to indicate the initial
• "
L
setting level.
B Press the L [LEVEL] Key several times to move to the display
L
adjustment level.
2" is displayed on the level/bank display to indicate the
• "
L
display adjustment level.
C Press the S [SHIFT] Key to make the SV display flash.
S
• The setting can be changed when the SV display starts to
flash.
D Use the U [UP] Key to change the set value.
U
E Press the M [MODE] Key to switch to the next parameter.
M
• The set value is registered.
F Press the L [LEVEL] Key for at least 1 s to return to RUN level.
L
1 s min.
Display adjustment level
Set value Meaning of set value
off
Comparative set value not
displayed.
on
Comparative set value
displayed.
R P C