Ricoh SAVIN D0AP Service Manual page 527

6.4 IMAGE ADJUSTMENT
6.4.1 REGISTRATION ADJUSTMENT
Print Area
Check that the adjustment meets the product specification.
[1]: Paper feed direction
•
• [2]: Print area
Adjustment Reference Values
B: Leading edge (Sub scanning direction): 3.0 ± 1.5 mm
•
D: Trailing edge (Sub scanning direction): 3.0 mm
•
• C: Left (Main scanning direction): 2.0 ± 1.5 mm
A: Right (Main scanning direction): 2.0 mm
•
Adjustment Procedure
1.
Enter the SP mode, and select the test pattern (15: Trim Area) with SP2-109-001 (Test
Printing: Pattern Selection).
2.
Print out a test pattern with SP2-109-002 (Test Printing: 1 Sheet Printing).
Print a test pattern, and then adjust the leading edge registration in the SP mode to the
optimum value.
3.
Do the leading edge registration adjustment.
1) Check the leading edge registration for each paper trays and adjust them with SP1-001.
SP No.
SP1-001-001
SP1-001-002
SP1-001-003
SP1-001-004
SP1-001-005
SM
SP Name
User LeadEdge Reg: By-pass: Plain
User LeadEdge Reg: Tray1: Plain
User LeadEdge Reg: Tray2: Plain
User LeadEdge Reg: Tray3: Plain
User LeadEdge Reg: Tray4: Plain
6-81
Image Adjustment
±4.0 mm
±4.0 mm
±4.0 mm
±4.0 mm
±4.0 mm
D0AP/D0C4/D0C5/D0C6/M0BQ/M0D1
Range