Ricoh SAVIN D0AP Service Manual page 103

27. Remove the tabs from the right cover [A] to create cutouts. On the rear side, use the small
tab.
28. Pass the USB cable through the cutouts, and then attach the right cover [A].
29. Carefully, move the operation panel slowly up and down, and then lift the scanner at the
rear, to make sure there is no tension on the USB cable.
SM
NFC Card Reader Type M27 (M502-10)
2-65 D0AP/D0C4/D0C5/D0C6/M0BQ/M0D1