Ricoh SAVIN D0AP Service Manual page 183

3.
Check if one of the following messages appears: "Will you download the latest package Ver
*** and update?" or "The installed package is the latest version.".
If the message appears, it is possible to execute ARFU. Press "No" and close SP mode to
complete the configuration.
The update will run immediately if you press "Yes" at the message "Will you download the
latest package Ver *** and update?" The update cannot be canceled if it is run by SFU.
(The update can be canceled if ARFU is used.)
SP5-886-116 (Auto Update Prohibit Term Setting) displays the scheduled date and time of
the next ARFU.
If error code 71: [Network connection error] appears when you click "Execute update", see
troubleshooting below.
(3) Prohibited date and time setting
Ask the customer for the prohibited times and days of the week for ARFU execution and set the
following as needed. The default prohibited time is from 9 a.m. to 5 p.m. and there is no
prohibited day.
SP5-886-112 (Auto Update Prohibit Term Setting) Default: 1 (ON)
•
• SP5-886-113 (Auto Update Prohibit Start hour) Default: 9
SP5-886-114 (Auto Update Prohibit End hour) Default: 17
•
SP5-886-120 (Auto Update Prohibit Day Of Week Setting) Default: 00000000 [00H]
•
Set the bits for the days of the week to prohibit updating.
Prohibited (Monday - Sunday): bit 7, Monday: bit 6, Tuesday: bit 5
Wednesday: bit 4, Thursday: bit 3, Friday: bit 2, Saturday: bit 1, Sunday: bit 0
e.g.) Prohibited on Mon., Fri., Sat., and Sun.: 01000111 [47H]
They can be specified also via Web Image Monitor if logged in as the machine administrator
from the device if SP5-886-111(Auto Update Setting) is set to "1 (ON)". For details, see
Specifying the Time and Day of the Week to Prohibit Updating via Web Image
SM
Auto Remote Firmware Update (ARFU) Settings
2-145 D0AP/D0C4/D0C5/D0C6/M0BQ/M0D1
Monitor.