Ieee 802.11 Interface Unit Type M24 (M500-08); Accessories; Installation Procedure - Ricoh SAVIN D0AP Service Manual

Table of Contents

IEEE 802.11 Interface Unit Type M24 (M500-08)

2.16 IEEE 802.11 INTERFACE UNIT TYPE M24 (M500-08)

IEEE 802.11 Interface board

Notes for Users

Caution chart

To prevent injury from electrical shock or damage to the machine, before installation

always, turn the main machine power off, and then unplug the machine power supply

cord from the power source.

To prevent damage to the circuits on the boards, always touch a metal surface to

discharge static charge from your body before you handle a board.

Never put your hand or a tool into the slot when you install an option.

When using wireless LAN (IEEE802.11 b/g/n:2.4-GHz band), this radio product uses

the 2.4-GHz band. Check that industrial, scientific and medical devices using the same

frequency bands, such as a microwave oven or a cordless telephone, are not used

If there is interference, communication may become unstable. Check that there are no

devices likely to cause interference in the surrounding area.

Loosen the two screws and remove the slot cover. The removed cover will not be reused.

Printer model:

D0AP/D0C4/D0C5/D0C6/M0BQ/M0D1

Table of Contents