Ricoh SAVIN D0AP Service Manual page 953

Code
15-13 Receive Buffer Full
15-14 Mail Header Format Error
15-15 Mail Divide Error
15-16 Mail Size Receive Error
15-17 Receive Timeout
15-18 Incomplete Mail Received
15-31 Final Destination for Transfer
Request Reception Format Error
15-39 Send/Delivery Destination Error
15-41 SMTP Receive Error
15-42 Off Ramp Gateway Error
15-43 Address Format Error
15-44 Addresses Over
15-61 Attachment File Format Error
15-62 TIFF File Compatibility Error
D0C5/D0C6/D0C4/D0AP FAX UNIT
Meaning Suggested Cause/Action
• Occurs only during manual reception.
Transmission cannot be received due to
insufficient buffer space. The buffer is being
used for mail send or Scan-to-Email.
The mail header is not standard format. For
•
example, the Date line description is
incorrect.
The e-mail is not in standard format. There is
•
no boundary between parts of the e-mail,
including the header.
• The mail cannot be received because it is too
large.
May occur during manual receiving only
•
because the network is not operating
correctly.
• Only one portion of the mail was received.
• The format of the final destination for the
transfer request was incorrect.
The transmission cannot be delivered to the final
destination:
Destination file format is incorrect.
•
Could not create the destination for the file
•
transmission.
• Reception rejected because the transaction
exceeded the limit for the "Auth. E-mail RX"
setting.
The delivery destination address was
•
specified with Off Ramp Gateway OFF.
Format error in the address of the Off Ramp
•
Gateway.
• The number of addresses for the Off Ramp
Gateway exceeded the limit of 30.
The attached file is not TIFF format.
•
Could not receive transmission due to:
Resolution error
•
Image of resolution greater than 200 dpi
•
without extended memory.
Resolution is not supported.
•
32
Error Codes
SM