2. Make a 1 cm fold at the tip of one end.
5.
Remove the deposits [A] at the leading edge of the fusing guide plate on the side where
paper passes.
6.
Rub the cotton swab (or tip of the folded paper) on the guide plate in the direction of paper
feed.
7.
Cut the tip of the folded paper (to about 30 mm), put it on the leading edge of the guide,
and then move it along the direction of paper feed to make sure that nothing remains
caught on the blade.
8.
Reattach the cover, reinstall the fusing unit, and then confirm that paper feeds correctly.
The first sheets may collect dirt from deposits that fell onto the hot roller and pressure roller
during guide blade during cleaning. These deposits should disappear after more paper
passes through (about 10 sheets).
D0AP/D0C4/D0C5/D0C6/M0BQ/M0D1
6-110
Other Troubleshooting
SM