Ricoh SAVIN D0AP Service Manual page 413

For example, when the update process is canceled while updating the first module of the
operation panel, the machine will reboot when all modules in the operation panel have been
updated.
The firmware contents included in the package can be referred to in the release note in the
SERES release of the package.
The next update will run 76 hours after the cancellation. The old (canceled) package will be
discarded if the package downloaded 76 hours later is the latest.
5.6.3 CHECKING THE ARFU RESULT
1.
Enter the SP mode.
2.
Press [Firmware update].
3.
Press [Update].
4.
Press [Update Package Information].
5.
If the firmware package is the same as the one on the global server, the update was
completed successfully. Otherwise, check the result using the logging date.
In SP7-520-041 to -045 (Update Log: Auto:Version), you can check the versions of the
packages updated by ARFU. (-041 displays the latest result. It is also printed on the SMC
sheet.)
5.6.4 CHECKING THE RESULT USING THE LOG DATA
1.
Enter the SP mode.
2.
Press [System/Copy].
3.
Check the results for ARFU by SP7-520-051 to 060 (Update Log: Auto:Result)
"-051" is the latest update result. For details about the number of each result log, see the
next section "Related SP."
5.6.5 RELATED SPS
SP Number Selection
Def.
SP5-886-111 0: OFF
1: ON
SP5-886-112 0: OFF
1: ON
SP5-886-113 0 to 23
9
SP5-886-114 0 to 23
17
SM
Auto Remote Firmware Update (MF Model Only)
Sets auto update by ARFU ON/OFF.
Will not run the update when update prohibited time setting is ON
and the current time is in the range of the time set.
• Start time < End time: Prohibited time is from the start time to
the end time on the same day.
Start time > End time: Prohibited time is from the start time to
•
the end time on the next day.
• Start time == End time: Prohibited time setting is disabled.
(Update will not be prohibited.)
5-39
Overview
D0AP/D0C4/D0C5/D0C6/M0BQ/M0D1