Ricoh SAVIN D0AP Service Manual page 419

6.
Remove the SD card slot cover [A].
7.
Remove the VM Card from the SD Slot 1 (Upper).
5.7.3 UPDATING JAVAVM AND INSERTING THE VM CARD
1.
Insert VM Card into the SD memory card reader/writer of your PC.
2.
Check that the SD memory card reader/writer is detected on your PC, and then write down
the drive letter. (If the SD memory card reader/writer is detected as (F:), the drive letter is
"f")
3. Download the update modules from the Firmware Download Center.
4.
Unzip the downloaded file, and then execute the .exe file.
5.
The folder is generated.
6.
Execute the .bat file in the folder.
7.
Input the drive letter following the message "Please input drive letter of SD card [a - x]: ". (If
the SD memory card reader/writer is detected as (F:), input "f")
8.
Press the [Enter] key to start updating Java VM.
It takes 3 minutes to update Java VM.
9.
After completing the update, remove VM Card from the SD memory card reader/writer of
your PC.
10. Insert VM Card into SD Slot 1 (upper) of the machine.
11. Attach the SD card slot cover.
SM
Updating JavaVM (Printer Model)
5-45 D0AP/D0C4/D0C5/D0C6/M0BQ/M0D1