Ricoh SAVIN D0AP Service Manual page 630

Bypass Tray Paper Detection
Bypass Tray Paper End Detection
The bypass tray is equipped with a paper detection feeler [A] and bypass paper end sensor
(S2) [B] that detect the presence of paper in the tray. The bypass paper end sensor (S2) goes
on (gap open) when there is a paper in the tray, and then goes off (gap blocked by the feeler)
after the last sheet feeds to signal the paper end.
• ON (Sensor gap open): Paper in the tray
• OFF (Sensor gap blocked): Paper out
Bypass Tray Paper Size Detection
The machine does not have a function to detect the size of paper loaded in the bypass tray.
Side-to-side Registration Adjustment in the Bypass Tray
To adjust side-to-side registration, loosen the screw on the right side of the tray, and slide the
guide [A] to the left or right to adjust the position.
D0AP/D0C4/D0C5/D0C6/M0BQ/M0D1 7-68
Paper Feed
SM