Ricoh SAVIN D0AP Service Manual page 387

5.3.5 ERROR SCREENS DURING UPDATING
MF Models
Printer Model
EXX shows an error code.
For error codes, refer to the following table:
Error Code List
Code Contents
1 The module data does not match.
2 An error occurred while initializing the
update program.
3 The ROM data to be rewritten is
missing.
SM
Firmware Update by SD Card
Solutions
• Power cycle the machine and try updating
again.
If the update cannot be made even if you
•
insert the correct SD card, there is a
possibility that the SD card is broken.
Retry again with a different SD card.
• If you cannot resolve the problem with the
above steps, replace the controller board.
>Power cycle the machine and try updating
•
again.
• If you cannot resolve the problem with the
above step, replace the controller board.
• Power cycle the machine and try updating
again.
5-13 D0AP/D0C4/D0C5/D0C6/M0BQ/M0D1