Ricoh SAVIN D0AP Service Manual page 435

Type
Operation panel
•
log
Debug logs are not saved in the following conditions:
•
While erasing all memory
•
While data encryption equipment is installed
•
• While changing the firmware configuration
• Forced power OFF (accidentally disconnecting the outlet)
Engine debug log in shutdown
•
When the power supply to the HDD is off because of energy saving (engine OFF mode
•
/STR mode)
When one of the following SC occurs: SC672, SC816, SC819, SC878, SC899, SC859,
•
SC860, SC861, SC863, or SC864
Following logs are not saved:
•
Log related to the energy saver mode (Engine-off, suspend-mode, or other cases)
•
Network communication log
Logs related to NRS
IP-FAX log
Access log for the unauthorized user (guest)
HTTP session timeout log
•
• Auto log-out log
IC card related log
•
Authorization for Fax
•
Security of the Operation Log
The following operation logs related to security are not saved.
User ID
•
• Password
IP address
•
Telephone number
•
• Encryption key
• Transition to SP mode
Storing the Device Logs on an SD Card
The model without HDD does not have space to store device logs. To store device logs on such
SM
Storage Timing
does not transfer the log.
When an error related to the operation panel
occurs.
5-61
Capturing the Debug Logs
Destination (maximum
storage capacity)
Memory in the operation
panel.
D0AP/D0C4/D0C5/D0C6/M0BQ/M0D1