Remarks
Notation
An asterisk (*) to the left side of ENG/CTL column means that this mode is stored in the
*
NVRAM. If you do a RAM clear, this SP mode will be reset to the default value. "ENG"
and "CTL" show which NVRAM contains the data.
*ENG: NVRAM on the BCU board
•
*CTL: NVRAM on the controller board
•
This denotes a "Special Service Program" mode setting.
SSP
D0AP/D0C4/D0C5/D0C6/M0BQ/M0D1
What it means
3-2
SM