Ricoh SAVIN D0AP Service Manual page 350

7.
Attach the new FCU board to the interface cover.
8.
Attach the interface cover to the machine, and then connect the harness.
9.
Connect one end of the supplied FFC [A] into the CN603 connector [B] on the new FCU
board.
Make sure that the blue tape of the flat cable faces outward.
The FFC connector has a lock lever [A]. Tilt the lever to lock the FFC.
D0AP/D0C4/D0C5/D0C6/M0BQ/M0D1 4-146
Electrical Components
SM