Ricoh SAVIN D0AP Service Manual page 69

Printing a Configuration Page
After you have installed the machine or options, print the configuration page to check the
machine status.
1.
Press [User Tools].
2.
Press [Machine Features].
3. Press [Printer Features].
4.
Press [Configuration Page] on the [List / Test Print] tab.
5.
Press [User Tools] on the top right of the screen.
After installing the machine, configure the hard disk overwriting and data encryption
•
settings. (Data Overwrite
2.4.3 MOVING THE MACHINE
• It is dangerous to handle the power cord plug with wet hands. Doing so could result in
electric shock.
Unplug the power cord from the wall outlet before you move the machine. While
•
moving the machine, take care that the power cord is not damaged under the machine.
Failing to take these precautions could result in fire or electric shock.
If you have to move the machine when the optional paper tray unit is attached, do not
•
push on the main unit's top section. Doing so can cause the optional paper tray unit to
detach, possibly resulting in injury.
• When disconnecting the power cord from the wall outlet, always pull the plug, not the
cord. Pulling the cord can damage the power cord. Use of damaged power cords could
result in fire or electric shock.
• The machine weighs approximately 30 kg (66.2 lb.). When moving the machine, use
the inset grips on both sides, and lift slowly in pairs. The machine will break or cause
injury if dropped.
• Do not hold the control panel while moving the machine. Doing so may damage the
control panel, cause a malfunction, or result in injury.
Be careful when moving the machine. Take the following precautions:
•
• Close all covers and trays, including the front cover and bypass tray.
If optional paper feed units are attached, remove them from the machine and move
•
them separately.
• Keep the machine level and carry it carefully, taking care not to jolt or tip it. Rough
handling may cause a malfunction or damage the hard disk or memory, resulting in
loss of stored files.
SM
Security, HDD Encryption)
2-31
Main Machine Installation (IM 430Fb)
D0AP/D0C4/D0C5/D0C6/M0BQ/M0D1