Maintenance Tables; Main Machine (P 501/ Im 430Fb) - Ricoh SAVIN D0AP Service Manual

2. PREVENTIVE MAINTENANCE TABLES

2.1 MAINTENANCE TABLES

Chart: A4 (LT)/6%
Mode: 3 prints/job
Environment: Normal temperature and humidity
Yield may change depending on circumstances and print conditions.

2.1.1 MAIN MACHINE (P 501/ IM 430FB)

Symbol keys: C: Clean, R: Replace
(R): Yield Parts
The parts mentioned in these tables have a target yield. However, the total copy/print volume
made by the machine will not reach the target yield within the machine's targeted lifetime if the
machine is used under the target usage conditions (ACV, color ratio, and P/J). So, these parts
are categorized not as PM parts but as yield parts (EM parts). The parts with "(R)" in this table
are yield parts.
Yield Parts (PCDU/Transfer/Fusing)
Item 40K
PCDU R
Transfer roller
Fusing unit
Air filter
Paper Feed/Exit/Others
Item
Paper feed roller (Tray 1)
Separation roller (Tray 1)
Bypass feed roller
SM
120K EM
R (Maintenance Kit)
R (Maintenance Kit)
C or R (Maintenance Kit)
Clean with a vacuum cleaner or replace.
EM
C Wipe with a damp cloth or clean with alcohol when
•
cleaning.
• Replace when a feeding failure occurs.
C
• Wipe with a damp cloth or clean with alcohol when
cleaning.
Replace when a double feed occurs.
•
C Wipe with a damp cloth or clean with alcohol when
•
cleaning.
Replace when a feeding failure occurs.
•
2-1
Maintenance Tables
Remarks
Remarks
D0AP/D0C4/D0C5/D0C6/M0BQ/M0D1