Ricoh SAVIN D0AP Service Manual page 415

SP Number Selection
Def.
SP7-520-051 to Display
060 only
Numbers set for the result history for SP7-520-051 to 060
No. Result
1 Downloading with SFU
2 HDD not installed
3 Updating with SFU
4 HDD error
5 Version information obtain error
6 Update download error
7 Name resolution error
8 Auto update setting disabled
9 Update prohibited time
10 Update postponed due to the
machine in use
SM
Auto Remote Firmware Update (MF Model Only)
The record is created when the update has successfully finished.
When the update is canceled, no record is created.
History of the results of the download and the update.
Refer below for the numbers set.
Cannot download or update because the machine is
now downloading the package for SFU.
Cannot download or update because the machine has
no HDD.
Cannot download or update because the machine is
being updated with SFU.
Cannot download or update because the HDD cannot
be used.
Cannot download or update because the version
information cannot be obtained.
Cannot download or update because the update
download failed.
In the non @Remote method, this shows that the
download failed because there was no proxy set.
Cannot download or update because the name cannot
be resolved upon downloading the update.
The package has been downloaded but will not run the
update because SP5-886-111 (auto update setting) is
disabled and SP5-886-115 (auto download setting for
SFU) is enabled.
Cannot start to update because the auto-update
prohibited time setting (SP5-886-112) is enabled and
the time update initiated was in the range of prohibited
time (SP5-886-113 to 114).
Or the day which update was initiated was a day for
which update was prohibited (SP5-886-120).
Cannot start update due to the following conditions
when the update was initiated.
The machine is in use by a user (the panel was
•
used within 30 seconds)
5-41
Overview
Description
D0AP/D0C4/D0C5/D0C6/M0BQ/M0D1