Ricoh SAVIN D0AP Service Manual page 344

9.
Turn the main power OFF. Disconnect the power cord.
10. Remove the SD card containing the NVRAM data from Slot 2.
11. Replace the NVRAM on the controller board and reassemble the machine.
Model))
12. Connect the AC power cord, and then turn the main power ON.
Do not insert anything into SD Card Slot 2.
•
SC673 appears at start-up, but this is normal because the controller and the smart
•
operation panel cannot communicate with each other due to changes in the
operation panel SP settings.
13. Change the SP settings for the operation panel.
If you switch the screen to enter the SP mode, SC995-02 is displayed. However, continue
the following steps.
SP5-748-101: (OpePanel Setting: Op Type Action Setting): Change bit 0 from 0 to 1.
•
• SP5-748-201: (OpePanel Setting: Cheetah Panel Connect Setting): Change the value
from 0 to 1.
14. Change the Flair API SP values.
SP5-752-001 (Copy FlairAPIFunction Setting): Change bit from 0 to 1.
•
SP3-301-001 (FAX:FlairAPI Setting) Change bit from 0 to 1.
•
15. Power cycle the machine.
The model information is written on the NVRAM (Novita), so SC995-02 does not
•
occur.
Program/Change Administrator will be displayed in Japanese, but this is normal.
•
16. Enter the SP mode and input the following SP settings according to the notes you made in
Step 6.
• SP5-985-001 (Device Setting: On Board NIC)
• SP5-985-002 (Device Setting: On Board USB)
17. Re-insert the SD card that you removed in Step 10 back into Slot 2.
18. Download the old NVRAM data from the SD card onto the new NVRAM with SP5-825-001
(NVRAM Data Download).
This will take about 2 or 3 minutes.
19. Turn the main power OFF, and then remove the SD card from the lower slot.
20. Turn the main power ON.
The screen "Program/Change Administrator" will be displayed in the language that is the
same language as the time when the data was uploaded to the SD card in Step 6.
21. Execute SP5-755-002 (Hide Administrator Password Change Scrn).
After you execute this SP and exit SP mode, the Home screen is displayed and user
D0AP/D0C4/D0C5/D0C6/M0BQ/M0D1 4-140
Electrical Components
(SCB (MF
SM