Registering The Remote Machine - Ricoh SAVIN D0AP Service Manual

Press [Connection Test] to check the connection with the client-side machine.
4.
If an error message is displayed, check the network connection with the client-side
machine and make sure that the IP address of the client-side machine is correct.
Press [OK] after "Connection Test" has been successfully done.
5.
Press [Exit] to terminate the System Settings.
6.

Registering the Remote Machine

First, register the Client-side Machine in the Remote Machine before doing this
•
procedure. Otherwise, registering the Remote Machine fails.
• Only one machine can be registered as the Remote Machine.
SM 7 D0C5/D0C6/D0C4/D0AP FAX UNIT
Fax Unit Options