Notes For Energy Save Mode Setting - Ricoh SAVIN D0AP Service Manual

USB Device Server Option Type M19A (D3BC-33, -34)
1. Use "RX" + the option's MAC address and access a web browser.
Example: http://RX0080926A3264
2. Ping "RX" + "MAC address" from the command prompt on a windows PC which is on
the same network as the mainframe.
When installing the USB Device Server Option Type M19A, the installation status is not shown
on the Configuration Page.

Notes for Energy Save Mode Setting

If the USB device server option is installed and the machine enters into the energy save mode,
you cannot print because there will be a communication error. Follow the instructions below to
prevent the machine from entering the energy save mode.
1.
Enter SP mode, and then set SP5-191-001 (Power Setting: Power Str) to "0 (Off)".
D0AP/D0C4/D0C5/D0C6/M0BQ/M0D1 2-98 SM