Ricoh SAVIN D0AP Service Manual page 393

Code Contents
66 Reception failed due to a status error
of the machine at the reserved
date/time of the package firmware
update from the network.
67 Acquisition of the latest version
information from the Gateway fails at
the reserved date/time of the remote
firmware update from the network.
68 Acquisition of the latest version
information from the Gateway fails.
69 Download fails at the reserved
date/time of the remote firmware
update from the network.
70 Package firmware download from the
network fails.
71 Network communication error occurs
at the reserved date/time of the
package firmware update from the
network.
72 The setting of @Remote is invalid at
the reserved date/time of the
package firmware update from the
network.
74 Decompression of compressed
package data failed.
75 The upper limit of the number of
update files exceeds.
221 Failed to terminate an application
when attempting to update or
uninstall it.
SM
Firmware Update by SD Card
Solutions
Reset the reservation date/time for the
•
remote update.
Check that the network is connected
•
correctly.
• Check that the network is connected
correctly.
Check that the network is connected
•
correctly.
Check that the network is connected
•
correctly.
Check that the network is connected
•
correctly.
Set the @Remote Service on the
•
Administrator Tools to [Do not Prohibit].
• Copy the correct package data on the SD
card and try updating again.
Replace the DIMM on the controller board if
•
the above solution does not solve the
problem.
Replace the HDD if the above solution does
•
not solve the problem.
Make two or more of the same module do not
•
exist under the /romdata directory on the SD
card.
• If a job is underway in the target application,
wait until the job is finished, and then try
updating again.
• Power cycle the machine and try updating
again.
5-19 D0AP/D0C4/D0C5/D0C6/M0BQ/M0D1