Exiting Sp Mode; Types Of Sp Modes; For Printer Model - Ricoh SAVIN D0AP Service Manual

1.
Press and hold the button [B] located at the right side of the operation panel and "Check
Status [A]" at the same time, until the number keyboard is displayed.
2.
Enter the key code for SP mode.

Exiting SP Mode

Press "Exit" on the LCD twice to return to the user screen.
In the printer model, press the [Escape] key.
To make the settings effective, turn the main power switch off and on after exiting
•
service mode.

5.1.3 TYPES OF SP MODES

For Printer Model

Type
Service SP SP modes related to the controller/printer functions
Engine SP SP modes related to the engine functions
Select one of the Service Program modes (Service, or Engine) with "Up/Down" keys, and then
push the "OK" key.
D0AP/D0C4/D0C5/D0C6/M0BQ/M0D1
Description
5-2
Service Program Mode
SM