Ricoh SAVIN D0AP Service Manual page 990

1: Disabled
3* 4th paper feed
station usage for fax
printing
0: Enabled
1: Disabled
4* LCT usage for fax
printing
0: Enabled
1: Disabled
5-7 Not used
* This setting can be used for the client-side machine which has no FCU.
Printer Switch 03 (SP No. 1-103-004)
No Function
0* Length reduction of received data
0: Disabled
1: Enabled
1-3 Not used
4 Page separation setting when sub
to scan compression is forbidden
7 00-0F (0-15 mm: Hex)
Default: 6 mm
* This setting can be used for the client-side machine which has no FCU.
Printer Switch 04 (SP No. 1-103-005)
No Function
0 Maximum reducible length when length reduction is enabled with switch 03-0 above.
to [Maximum reducible length] = [Paper length] + (N x 5mm)
4 "N" is the decimal value of the binary setting of bits 0 to 4.
Bit 4 Bit 3
0 0
0 0
SM
Do not change the settings.
Comments
0: Incoming pages are printed without length
reduction.
(Page separation threshold: Printer Switch 03, bits 4
to 7)
1: Incoming page length is reduced when printing.
(Maximum reducible length: Printer Switches 04, bits
0 to 4)
Do not change the settings
Page separation threshold (with reduction disabled
with switch 03-0 above).
For example, if this setting is set to "10", and A4 is
the selected paper size:
If the received document is 10 mm or less longer than
A4, then the 10 mm are cut and only 1 page prints.
If the received document is 10 mm longer than A4,
then the document is split into 2 pages.
Comments
Bit 2 Bit 1
0 0
0 0
69
Bit Switches – 2
Bit 0 Setting
0 0 mm
1 5 mm
D0C5/D0C6/D0C4/D0AP FAX UNIT