Ricoh SAVIN D0AP Service Manual page 270

5.
Release the four hooks in the order shown below, and then remove the ferrite core [B] from
the holder to disconnect the FFC [A].
6.
Release the routed harnesses from the harness guide [A], and then remove it.
7.
Remove the gear bracket [A].
8.
Remove the gears [A].
Do not remove the gear [B] (this prevents inner pin [C] from falling into the machine).
D0AP/D0C4/D0C5/D0C6/M0BQ/M0D1 4-66
SPDF (MF Model Only)
SM