Ricoh SAVIN D0AP Service Manual page 386

11. When the update was completed normally, the "Update done" is displayed.
12. After turning the power off, remove the SD card.
13. Turn the power on again, and check whether the machine is operating normally.
14. Attach the SD card slot cover to the original position.
• When the power supply is switched OFF during the firmware update, the update
process is interrupted, and when the power is switched ON again, normal operation
cannot be guaranteed.
• To guarantee operation, an update error continues to be displayed until the update is
successful.
In this case, insert the SD card again, switch the power ON, and continue
•
download of firmware from the SD card automatically.
The PS3 firmware program is included in the preinstalled PDF firmware. In the default
•
state, although the PS3 firmware program is hidden in the disabled state, the function
is enabled by installing the PS3 card. (The program installed in the PS3 card is a
dongle (key) for enabling the PS3 function).
• Due to the above specification, the self-diagnosis result report shows the ROM
module number/software version of the PDF firmware at the PS location.
D0AP/D0C4/D0C5/D0C6/M0BQ/M0D1
Firmware Update by SD Card
5-12 SM