Ricoh SAVIN D0AP Service Manual page 611

Status
Definite toner Toner end sensor detects the
near-end amount of toner remaining.
Toner end Calculated from definite
near-end.
Estimated Toner Near End
When the amount of toner remaining (%) *1 is calculated from the amount of toner supplied, or
the total distance (%) *2 of operation by the toner cartridge, whichever is lower is taken as the
value of the amount of toner remaining. Either can be calculated from the toner supply
operation time. When the amount of toner remaining reaches the threshold of the amount of
toner available for use *3, this triggers the estimated toner near-end alert.
*1 Toner remaining [%] = { Amt. toner supplied [g] / (Initial toner fill [g] - Toner fill tolerance and
toner amt. margin [g]) } x 100
*2 Amt. toner consumed [%] = (Toner cartridge operation time distance / Used toner end
distance) x 100
*3 The near-end and utilization threshold value can be selected with SP3-098-001: 0 Early, 1
Normal, 2 Late (default) or the UP setting. The notification timing and printable pages for each
setting are as shown below.
UP setting* SP3-098-001
Notify Sooner 0 (Early)
Normal 1 (Normal)
Notify Later 2 (Late)
*UP setting: User Tools > machine Features > Maintenance > Replacement Alert
SM
Detect Condition
Notify timing
About 7 days before end
About 5 days before end
About 3 days before end
7-49
PCDU, Toner Cartridge
What Happens (Operation panel message)
MF model:
"[System Message] Toner Cartridge is
empty. Printing will be suspended soon.
Replace the cartridge."
Printer model:
"Check you have a print cartridge
replacement(s). Contact your local vendor."
MF model:
Printing halts.
"[Add Toner] The following toner has been
depleted. Procedure for adding toner is
shown on the right."
Printer model:
Printing halts.
"[Add Toner] Replace Print Cartridge. Press
the Menu key to check supplies."
D0AP/D0C4/D0C5/D0C6/M0BQ/M0D1
Printable pages
Approx. 950
Approx. 680
Approx. 400