Ricoh SAVIN D0AP Service Manual page 974

MH: MH compression
JBO: JBIG compression (Optional mode)
JBB: JBIG compression (Basic mode)
Communication ECM: With ECM
mode NML: With no ECM
Width and reduction A4: A4 (8.3"), no reduction
B4: B4 (10.1"), no reduction
A3: A3 (11.7"), no reduction
I/O rate 0: 0 ms/line
5: 5 ms/line
10: 10 ms/line
20: 20 ms/line
25: 2.5 ms/line
40: 40 ms/line
System Switch 01 - Not used (Do not change the factory settings.)
System Switch 02 (SP No. 1-101-003)
No Function
0-1 Not used
2 Forced reset after
transmission stalls
0: Off
1: On
3 Not used
4 File retention time
0: Depends on User
Parameter 24 [18(H)]
1: No limit
5-7 Not used
System Switch 03 - Not used (Do not change the factory settings.)
System Switch 04 (SP No. 1-101-005)
No Function
0-2 Not used
SM
"40" is displayed while receiving a fax message using AI short
•
protocol.
Comments
Do not change these settings.
With this setting on, the machine resets itself automatically if a
transmission stalls and fails to complete the job.
Do not change these settings.
1: A file that had a communication error will not be erased
unless the communication is successful.
Do not change this setting
Comments
Do not change these settings.
53
Bit Switches – 1
D0C5/D0C6/D0C4/D0AP FAX UNIT