Ricoh SAVIN D0AP Service Manual page 491

6.2.9 SC800 (CONTROLLER)
SC No. Type
SC816 - Energy save I/O subsystem error
SC816-01 D Subsystem error
SC816-02 D Sysarch (LPUX_GET_PORT_INFO) error
SC816-03 D Transition to STR was denied.
SC816-04 D Interrupt in kernel communication driver
SC816-05 D Preparation for transition to STR failed.
SC816-07 D Sysarch (LPUX_GET_PORT_INFO) error
SC816-08 D Sysarch (LPUX_ENGINE_TIMERCTRL) error
SC816-09 D Sysarch (LPUX_RETURN_FACTOR_STR) error
SC816-10 D Sysarch (LPUX_GET_PORT_INFO) error
SC816-11 D Sysarch (LPUX_GET_PORT_INFO) error
SC816-12 D Sysarch (LPUX_GET_PORT_INFO) error
SC816-13 D open() error
SC816-14 D Memory address error
SC816-15 D open() error
SC816-16 D open() error
SC816-17 D open() error
SC816-18 D open() error
SC816-19 D Double open() error
SC816-20 D open() error
SC816-22 D Parameter error
SC816-23 D read() error
SC816-24 D read() error
SC816-25 D write() error
SC816-26 D write() communication retry error
SC816-27 D write() communication retry error
SC816-28 D write() communication retry error
SC816-29 D read() communication retry error
SC816-30 D read() communication retry error
SC816-35 D read() error
SC816-36 D Subsystem error
to -98
Energy save I/O subsystem detected some abnormality.
•
•
SM
Error Name/Error Condition/Major Cause/Solution
Energy save I/O subsystem defective
Energy save I/O subsystem detected a controller board error
6-45 D0AP/D0C4/D0C5/D0C6/M0BQ/M0D1
Service Call